Log In | Subscribe . . Contact | Imprint
Visit Sukano Visit R + D Visit Index-6 Go with the flow 2017 Visit Otto HofstetterVisit BericapVisit ConairVisit NetstalVisit EngelVisit SMI PETplanet Events Visit Interplastica Visit Petcore Europe Visit Beviale Moscow Visit NPE 2018 Visit Birkner

News

The SK Ergon packers can now be equipped with an automatic handle applicator of the Pre-Shrinking Handle Applicator (PSHA) series, which attaches a handle on a section of the shrink film before it's wrapped around a group of containers moving toward the shrink tunnel. The pre-shrinking handle applicator of the PSHA series can be installed on the operator's side, on the opposite side or on both sides in case of dual lane production.

The pre-shrinking handle applicator matches adhesive tape with a non-adhesive central support (a handle made of paper or plastic), thus composing an uninterrupted string of handles which, once wound on a reel, is loaded on automatically-locking mandrels to be then attached onto the heat-shrinking film surface.

The PSHA handle applicator is synchronised with the packaging machine on which it is installed and this latter sets automatically in stand-by mode when the handle reel is used up.

Moreover, the pre-shrinking handle applicator is outfitted with an operator panel enabling the direct adjustment of parameters, the memorisation of a maximum of 10 formats, the real-time monitoring of the machine and the data transfer to the customer's control system by Modbus TCP protocol on Ethernet network.

Visit SMI S.p.A.

Visit SMI S.p.A. on WikiPETia

Visit Retal